Automatic Cubic stone splitting machine test machine adjustment test video

1. Check if the oil tank is filled with enough hydraulic oil.

2. The switch of the handheld operation box should be set to the "automatic" position, the switch "manual/automatic" on the electrical box panel should be set to the "automatic" position, and then press the "auto start" button, the machine will enter the automatic operation state to cut stones.

3. Touch the feed in place sensor to simulate the stone feed in place. The feed device descends and the push conveyor chain starts to work.

4. Block the push in place sensor to simulate the stone entering the stone cutting position. The push conveyor chain starts to work intermittently, and the stone cutting device also starts to work.